A Series that gives you more...
The Commercial Series offers the ultimate blend of choice, performance and the latest in security together with design flair to enhance the quality of any building. With 40 standard powder coated colours to choose from, Windows and Doors that have surpassed extreme levels of testing and security feature options that quadruple the locking strength of standard window locks, this Series really does offer the ultimate in versatility.
The range of Commercial Windows & Doors will complement any of the Commercial Façade or Curtain Wall Façade Suite options. They are easily integrated into the suite from a fabrication and installation perspective while also continuing the consistent ‘Commercial’ look and feel.
Features and Benefits
Our expansive range of Commercial Windows and Doors utilise Italian designed high performance EPDM (ethylene propylene diene monomer) rubber to seal every joint where air and water leakage could occur.
These seals have been tested for water penetration resistance at wind speeds of approximately 145km/h, triple the performance of normal seals.
Glazing Options
The minimum glass thickness required is 4mm for single glazing and the maximum double-glazing unit is 28mm.
Powder Coating
Powder coating is available in a large range of colours. For standard residential applications this is applied to a minimum 60 micron thickness but can be increased up to 80 microns for more unforgiving environments.
There is a standard D1010 warranty of the Top 40 Standard Colours. This provides a 10-year warranty on colour integrity and a 10-year warranty on film integrity for use in residential, commercial, high-rise and marine environments.
Further warrantees are available dependent on colour and the specific environmental conditions and performance requirements.
Anodising
Anodising is available in silver, bronze and black. The quality and longevity of the anodise finish is dependent on the thickness of the oxide layer. The standard is 12 micron with 20 micron and 25 micron also available for commercial or marine environments.
Testing
The Commercial Series has been tested and complies with NZS 4211 and AS 2047. This compliance is the result of thorough testing, quality design and strict quality control in manufacturing. Test Certificates are available upon request.
Design Loads
The Commercial Series achieves the relevant standards serviceability wind pressure, ultimate wind pressure and water pressure requirements.
